GE Digia II User Manual page 44

36 Digia II
User Manual
Time update by. Select the time interval you want the system to update its time. Choose between day,
week, and month.
System admin
Use the System admin submenu (Figure 25) to set the system administration options.
Figure 25. System admin
The menu options include the following:
Language. English.
OSD color. Select the color of your display. Choose from white, black, red, yellow, magenta, and cyan.
Load/save setting. Press Enter, then up or down. Select whether you'd like to cancel the process, load
factory defaults, load other settings, or save settings.
Firmware upgrade. Plug in a USB device that has the new firmware on it, press Enter, then use the
directional buttons to select Firmware upgrade. Enter the passcode (default is 4444). Your USB device
must have at least 5 MB of free space.
Delete HDD. Press Enter, then up or down. Enter the passcode (default is 4444). This will delete
everything on the hard drive.
Admin passcode. Change an admin passcode.
Confirm. Reenter the passcode you entered as your Admin passcode to confirm.
User passcode. Change a user passcode.
Confirm. Reenter the passcode you entered as your User passcode to confirm.
Network passcode. Change a network passcode.
Confirm. Reenter the passcode you entered as your Network passcode to confirm.
Digia II Menu - System
<< System Admin
Language
English
OSD Color
White
Load/Save Setting
NO
Firmware Upgrade
NO
Delete HDD
NO
Admin Pass Code
****
Confirm
****
User Pass Code
****
Confirm
****
Network Pass Code
********
Confirm
********
>>