AEG AWUS020B5B User Manual page 52

52 www.aeg.com
3.6 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
Tools you need:
• cross-shaped screwdriver,
• putty knife or thin-blade screwdriver.
1. Make sure the appliance stands
upright.
2. Open the door and remove all wine
bottles from the shelves. Close the
door.
3. Unscrew the 4 screws that connect
the bottom hinge. Put the bottom
hinge in a safe place together with
the screws.
4. Remove the door and put it on a soft
surface.
5. Unscrew the screws that connect the
upper hinge at the top right corner of
the appliance. Put the upper hinge in
a safe place together with the
screws.
6. Use a putty knife or a thin blade
screwdriver to remove 3 screw hole
covers from the left upper corner of
the appliance. Transfer and insert the
covers to screw holes at the other
side.
7. Screw the top hinge on the left side
of the appliance.
8. Set the door into its new place.
9. Secure the lower hinge and do not
tighten the screws, until the door is in
the closed position and levelled.
10. Wait at least 4 hours before
connecting the appliance to the
power supply.