Emc (Electromagnetic Compatibility) Statements - AGFA DR 14s User Manual

110 | DR 14s | Remarks for HF-emission and immunity

EMC (Electromagnetic Compatibility) Statements

The DR Detector is designed and tested to comply with IEC
60601-1-2(EN60601-1-2) which is applicable to regulations regarding EMC
for medical devices and needs to be installed and put into service according to
the EMC information stated as follows.
If this equipment does cause harmful interference to other devices, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• reorient or relocate the receiving device.
• increase the separation between the devices.
• connect the equipment into an outlet on a circuit different from that to
which the other devices are connected.
If the problem cannot be solved with the above measures, stop using the
equipment and consult your sales representative or local Agfa dealer.
0350B EN 20190319 1349 *