168 | Drystar AXYS | Plug & Play Installation Manual
Configure network settings
The printer is configured with the following APIPA addresses:
Printer IP address:
Subnet mask:
Ask your network manager the following information:
Printer IP address:
Netmask:
Router IP address:
Called AE_Title:
1. Select and initiate the printer installation wizard.
a) Press the Key-operator key.
b) In the Key-operator main menu, select Installation.
c) In the Installation menu, select Printer install.wizard.
d) Follow the instructions.
2. Select and initiate printer calibration.
a) Press the Key-operator key.
b) In the Key-operator main menu, select calibration.
c) In the Select Calibration menu, select Film.
d) Follow the instructions.
The printer is ready for use!
2852E EN 20210601 1655
(see Reference manual).
(see Reference manual).
169.254.10.10
255.255.0.0