112 | Drystar 5500, Drystar 5503 | Preventive maintenance and replacements
Cleaning and disinfection
All appropriate policies and procedures should be followed to avoid
contamination of the staff, patients and device. All existing universal
precautions should be taken to avoid that the printer comes into contact with
potential contaminations. Details about cleaning can be found in the following
pages.
To clean the exterior of the printer:
1. Switch off the printer.
2. Remove the power plug from the socket.
3. Remove the network cable.
4. Wipe the exterior of the printer with a clean, soft, damp cloth.
5. Plug in the printer and switch it on.
Related Links
Switching off the printer
Switching on the printer
2901J EN 20191018 0826
WARNING:
Make sure no liquid gets in the printer.
Note: Do not open the printer for cleaning. No components
inside the printer require cleaning by the user.
on page 69
on page 66