Casio Geometry User Manual page 68

When you see
It means this:
this message:
Range ERROR View Window settings are wrong.
The Edit Animations screen is
confi gured with the setting t0=t1.
Too Many You are trying to add more than
Animations 10 animations.
First select You are trying to execute the Trace
point(s). command without fi rst specifying
a trace point.
Too Many Trace You are trying to specify more
Points than 10 trace points.
Too Many Rows You are trying to add more than
26 columns to an animation table.
First confi gure • You are trying to run an
animation animation without fi rst
settings. confi guring its settings.
• You are trying to execute an Add
Table command without fi rst
confi guring animation settings.
Cannot Add • The point you selected for an
Animation Add Animation or Replace
Animation command operation
cannot be used in an animation
because it is locked, etc.
• The point you selected for an
Add Animation or Replace
Animation command operation
cannot be used in an animation
because it is already being
used in the animation you
are confi guring or in another
animation.
7-2
Error Messages
So you need to do this:
Confi gure proper settings or
initialize View Window settings by
pressing 1(INIT) J.
Confi gure the Edit Animations
screen so t0 and t1 are assigned
different values for the same
animation.
Use the Edit Animations screen to
delete animations you no longer
need, or create a new fi le and add
new animations.
Specify the trace point and try
again.
Select only up to 10 trace points.
Delete columns from the
animation table that you do not
need and try again.
Confi gure animation settings and
try again.
Select a point to which animation
can be added and try again.
20060601