Casio Geometry User Manual page 36

4. To exit the Pan mode, press J.
Note
In the Pan mode, each press of w toggles the shape of the pointer between 2 and I.
While the 2 pointer is displayed, you can use the cursor keys to move it to another location
on the screen. Pressing the cursor keys while the I pointer is displayed will shift (pan) the
screen contents.
u To scroll the screen
1. Press . or perform the following operation: 1e(View) – 3:Scroll.
• This enters the Scroll mode, which is indicated by the N icon in the upper right corner
of the screen. The pointer disappears from the screen at this time.
2. Use the cursor keys to scroll the screen in the direction you want.
3. To exit the Scroll mode, press J.
Zooming
The Geometry Mode provides you with a selection of zoom commands that you can use to
enlarge or reduce an entire screen image or a specifi c area of an object.
u To zoom using the zoom box
1. Perform the following operation: 1e(View) – 1:Zoom Box.
• This causes the S icon to appear in the upper right corner of the screen.
2. Move the pointer to the location on the display on one edge of the area you want to select
as the zoom box area and then press w.
Controlling the Appearance of the Geometry Window
3-4
20070101 20060601