Fan mounting sequence:
•
Make sure that the fan is disconnected from power mains.
•
Mark the positions for mounting the fixing brackets on the load-bearing surface.
•
Drill the holes and fix the bracket with matching fasteners (e.g. dowels), see fig. b.
•
Install the fan on the fixing bracket (fig. c).
•
tighten the fixing screws (fig. d).
•
connect the air ducts to the fan spigots (fig. e).
•
tighten the quick-detachable clamps at the points where the air ducts are connected to the spigots (see fig. e).
connection options of the air duct to the
a
c
e
g
12
VKP ... /... x4
fans are shown in fig. g, h.
b
d
f
h
VKP mini
www.ventilation-system.com