Muratec MFX-2570 User Manual page 144

You can register the following items.
Common Settings
Setting
Host Name Enter the host name of the machine.
The default setting is the MAC address.
If multiple machines are connected to the same
network, make sure to set a different host name
for each machine.
Workgroup Enter the workgroup name of the network the
machine is connected to.
DNS Server When using a DNS server, enter the primary
Addresses DNS server address and the secondary DNS
server address.
DNS Suffix To perform name resolution using only a host
name, register the DNS suffix.
IPv4 Setting
Setting
Obtain an Set whether to enable or disable the DHCP
IP address setting.
automatically Set "ON" to enable the DHCP setting, or "OFF"
to disable it.
IP Address Enter the IP address.
If DHCP is enabled, the retrieved IP address is
displayed, and you cannot edit it.
Subnet Mask Enter the subnet mask.
If DHCP is enabled, the retrieved subnet mask
is displayed, and you cannot edit it.
Default Gateway If you are using a gateway, enter the gateway
address.
WINS Server If you are using a WINS server, enter the WINS
Address server address.
IPv6 Setting
These settings are displayed when you click [+].
Setting
Obtain an Set whether to enable or disable the DHCP
IPv6 address setting.
automatically Set "ON" to enable the DHCP setting, or "OFF"
to disable it.
Link Local Displays the link local IP address.
Address This address cannot be edited.
Description
Description
Description
Setting the Connection Environment
Settings
15 characters
(The following
characters cannot
be used: !@#$%^&()-
_'{}.~\*+=|:;"?<>,)
15 characters
(The following
characters cannot be
used: !@# $% ^&()-
_'{}.~ ¥ * +=|:;"?<>,)
WORKGROUP
XXX.XXX.XXX.XXX
format (Where XXX
is a number between
0 and 255.) 0.0.0.0,
255.255.255.255, and
127.xxx.xxx.xxx cannot
be entered.
50 characters
Settings
ON
OFF
XXX.XXX.XXX.XXX
format (Where XXX
is a number between
0 and 255.) 0.0.0.0,
255.255.255.255, and
127.xxx.xxx.xxx cannot
be entered.
Settings
ON
OFF
−
3-61
1
2
3