3D LabPrint Piper J-3 Cub User Manual page 9

Step By Step PDF/VIDEO userguide
1 Choose airplane
.
2. Create account, download
You will receive download link to all the zipped files to your
email right after the checkout (please check your spam folder
if not). If you are logged in with your account while purchasing
the model, you will find the download link in your account's
Downloads section
support@3dlabprint.com
3. Prepare Gcodes
option A Gcodes:
if your printer is i3 comptatible you can use
SD card and let the 3d printer do it's job. HE temperature is set to 240°C so the layers fuse
together well, you can adjust speed and temperature only through your printer's LCD. If these
Gcodes does not work for you, please proceed to the next options.
... print your plane | www.3DLabPrint.com
at www.3Dlabprint.com, visit our
Basic requirments for A6M2 Zero are 200/200/195 mm
volume, nozzle 0.4mm recommended (0.35 or 0.5mm
alternativelly). Heated bed recommended. Designed to be
printed with
Contact: support@3dlabprint.com
on our website.
if you have trouble getting the files.
page
Facebook
Polylight LW-PLA filament by
Please contact
prepared gcodes directly. Just save them to the
9
for latest info.
3DLabPrint.