Technical Data - ABB Spot 35 R Original Instructions Manual

7

Technical data

Manufacturer
Address
Power supply
Operating voltage
Current consumption
Output currents
Time delay t (in/out)
General
Protection class
Response time
Light source
Minimum interruption time
Min. detectable object
Optical power
Range
Radiant power adjustment
Responsivity adjustment
Mounting
Ambient temperature
Size
Weight
Material
Colour
Connector
2TLC172178M0201, rev. D
2011-11-15
ABB AB / JOKAB SAFETY
Varlabergsvägen 11
SE-434 39 Kungsbacka
Sweden
17-27 VDC, ripple ± 10 % (SELV/PELV)
Transmitter: < 25 mA
Receiver: < 15 mA
Information output: Max. 10 mA
Dynamic signal output: Max. 30 mA
t < 250 µs
IP67
Spot 10: 5 ms (+48 ms in Vital 1)
Spot 35: 5 ms (+48 ms in Vital 1)
Red visible light, 660 nm. Spreading angle < ± 2.5°
90 ms
50 mm
Spot 10: < 0.1 mW
Spot 35: < 0.2 mW
Spot 10: 0 – 10 m
Spot 35: 0 – 35 m
Spot 10: Trim pot. on transmitter
Spot 35: Trim pot. on receiver
Spot 10: 2 x M18 nuts (provided)
Spot 35: Either via mounting holes in the casing or with angle bracket JSM63 (provided)
-25...+65°C
See drawing
Spot 10: 2 x 21 g
Spot 35: 2x 100 g
Spot 10: Steel housing with polyacryl lens protection
Spot 35: Polyamide housing with polyacryl lens protection
Spot 10: Steel grey
Spot 35: Yellow and black
M12 fixed connector
17 www.abb.com/lowvoltage