Obtain the absolute value of each element of MatB (Abs(MatB)).
Determine the square and cube of MatA (MatA
Note: You cannot use
) to specify cubing.
Creating a Number Table from a
TABLE generates a number table for
Perform the following steps to generate a number table.
2. Input a function in the format
• Be sure to input the X variable (
table. Any variable other than X is handled as a constant.
• The following cannot be used in the function: Pol, Rec, ,
3. In response to the prompts that appear, input the values you want to use,
For this prompt: Input this:
• Inputting the Step value and pressing
number table in accordance with the parameters you specified.
the function input screen in step 2.
To generate a number table for the function
for this input. Use
(TABLE) to enter the TABLE Mode.
after each one.
Input the lower limit of X (Default = 1).
Input the upper limit of X (Default = 5).
Note: Make sure that the End value is always
greater than the Start value.
Input the increment step (Default = 1).
Note: The Step specifies by how much the Start
value should be sequentially incremented as the
number table is generated. If you specify Start = 1
and Step = 1, X sequentially will be assigned the
values 1, 2, 3, 4, and so on to generate the number
table until the End value is reached.
while the number table screen is displayed will return to
1, incremented in steps of 0.5
), using the X variable.
(X)) when generating a number
to specify squaring, and
) using an input
generates and displays the