Creating A Number Table From A Function (Table) - Casio fx-570ES PLUS User Manual

Obtain the absolute value of each element of MatB (Abs(MatB)).
7 7
Determine the square and cube of MatA (MatA
8 8
Note: You cannot use 6 for this input. Use w to specify squaring, and
1w(
x
3
) to specify cubing.
Creating a Number Table from a
Function (TABLE)
TABLE generates a number table for
Perform the following steps to generate a number table.
1. Press N7 (TABLE) to enter the TABLE Mode.
2. Input a function in the format
• Be sure to input the X variable ( S)(X)) when generating a number
table. Any variable other than X is handled as a constant.
• The following cannot be used in the function: Pol, Rec, ∫ ,
3. In response to the prompts that appear, input the values you want to use,
pressing = after each one.
For this prompt: Input this:
Start?
End?
Step?
• Inputting the Step value and pressing = generates and displays the
number table in accordance with the parameters you specified.
• Pressing A while the number table screen is displayed will return to
the function input screen in step 2.
To generate a number table for the function
range –1
A1w(Abs) MatB )=
AMatA 1w(
f x
(
Input the lower limit of X (Default = 1).
Input the upper limit of X (Default = 5).
Note: Make sure that the End value is always
greater than the Start value.
Input the increment step (Default = 1).
Note: The Step specifies by how much the Start
value should be sequentially incremented as the
number table is generated. If you specify Start = 1
and Step = 1, X sequentially will be assigned the
values 1, 2, 3, 4, and so on to generate the number
table until the End value is reached.
x
1, incremented in steps of 0.5
N7(TABLE)
AMatA w=
x
x f x
and ( ) using an input
), using the X variable.
E-32
2 3
, MatA ).
) =
3
f x
(
d dx
/
1
f x x
( ) = 2 +
2
B
) function.
, Σ .
for the
Math Math