Contents 1. Safety information....................2 2.Technical information....................3 3.Attachment and body size ..................6 4.Installation and connecting..................7 5. Control panel......................9 6. Menu setting......................10 7.Channel function....................13 Circuit connecting diagram ..................22 9.Cleaning and maintenances.................23 10.Troubeshooting....................23 Duty exonerative and copyright protection ............24 Congratulations on choosing our company product! We thank you for your custom. ◆Please note that this product, as all the others in the rich my company range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements.
SAFETY INFORMATION • Installation Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. The safety chain must be properly hooked onto the fitting and secured to the framework, so that, if the primary support system fails,the fitting falls as little as possible.
TECHNICAL INFORMATION ● Lamp: ● Software upgrade -Insert USB upgrade software. Brand:NSL400L USHIO ● Wash effect - Lamp power:400W -Adjustable wash effects angle - Colour temperature 7300K ● IP set - Average life 1200h -Automatic charging battery,IP could be set without ●...
Safety rope Safety rope Installing the projector- Fig. 3 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted. This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.
Page 9
power in power end The N terminal is connected with the blue line. Ground The L terminal is connected with the brown line. The items can’t be more than 2pcs under series. ● connection to the eiectricty mains must be carried out by a qualified electrical ●...
sig n al end DMX512 in Connecting to the control signal line (DMX) - Fig. 5 ◎ Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first projector's output to the second projector' input and connect the second projector's output to the third projector's input.
MENU SETTING(V1.0) Ⅰ menu Ⅱ menu Ⅲ menu Main menu → DMX Address Address: 001-512 Total****(h) → Lamp hours Lamp open****(h) → Temperature Board: ***.* → Undistributed RDM UID Fan1:**.*V Fan2:**.*V Fan1:****RPM Fan speed/Voltag → Fan2:**** RPM Fan3:****RPM 1.Colour(***) 2.Shutter(***) 3.Dimmer(***) 4.Gobo(***) 5.Prism(***)
Page 12
Ⅰ menu Ⅱ menu Ⅲ menu Main menu → Pan invert P/T invert → → Tilt invert English(英文) Language → Chinese(中文) Open Back Light → Auto close(15s) Personal → → Display Normal → Reversal Rota.180 → Backlight blink Return(ESC) Return(ESC) 1.Colour(***) 2.Shutter(***) 3.Dimmer(***)
Page 13
Ⅰ menu Ⅱ menu Ⅲ menu Main menu → STEP *** Test effect → → Test all STEP *** Test Return(ESC) Return(ESC) Error list Keep Clean error Clean 000-255 000-255 Tilt 000-255 Dimmer1 000-255 Dimmer2 000-255 Focus1 000-255 Focus2 → Calibration 000-255 Colour...
CHANNEL FUNCTION(V1.0) CHANNEL table (standard 16CH) Percentage Channe Function Colour 0-1.56 White 1.96-3.14 White+Red 9-12 3.53-4.71 13-17 5.10-6.67 Red+Orange 18-21 7.06-8.24 Orange 22-25 8.63-9.80 Orange+Aquamarine Aquamarine 26-29 10.2-11.4 Aquamarine+Green 30-34 11.8-13.3 35-38 13.7-14.9 Green 39-42 15.3-16.5 Green+Light Green 43-46 16.9-18.0 Light Green 18.4-20.0 Light Green+Lavender...
Page 15
Percentage Channe F un ct i o n 0-255 0-100 Dimmer GOBO 0- 1.2 White 1.6-2.7 Gobo1 8-11 3.1-4.3 Gobo2 12-15 4.7-5.9 Gobo3 16-19 6.3-7.5 Gobo4 20-23 7.8-9.0 Gobo5 24-27 9.4-10.6 Gobo6 28-31 11.0-12.2 Gobo7 Gobo8 32-35 12.5-13.7 Gobo9 36-39 14.1-15.3 40-43 15.7-16.9...
Page 16
Percentage Channe Function 192-207 75.3-81.2 Slow → Fast Rotation,90 degrees back and forth 208-223 81.6-87.5 Slow → Fast Rotation,180 degrees back and forth Slow → Fast Rotation,270 degrees back and forth 224-239 87.8-93.7 240-255 94.1-100 Slow → Fast Rotation,360 degrees back and forth Prism Macro 0-15 0-5.9...
Page 17
CHANNEL table (steamline 14CH) Percentage Channe Function Colour 0-1.56 White 1.96-3.14 White+Red 9-12 3.53-4.71 13-17 5.10-6.67 Red+Orange 18-21 7.06-8.24 Orange 22-25 8.63-9.80 Orange+Aquamarine Aquamarine 26-29 10.2-11.4 Aquamarine+Green 30-34 11.8-13.3 35-38 13.7-14.9 Green 39-42 15.3-16.5 Green+Light Green 43-46 16.9-18.0 Light Green 18.4-20.0 Light Green+Lavender 47-51...
Page 18
Percentage Channe F un ct i on 0-255 0-100 Dimmer GOBO 0- 1.2 White 1.6-2.7 Gobo1 8-11 3.1-4.3 Gobo2 12-15 4.7-5.9 Gobo3 Gobo4 16-19 6.3-7.5 20-23 7.8-9.0 Gobo5 24-27 9.4-10.6 Gobo6 28-31 11.0-12.2 Gobo7 Gobo8 32-35 12.5-13.7 Gobo9 36-39 14.1-15.3 Gobo10 40-43 15.7-16.9...
Page 19
Channe Percentage Function 192-207 75.3-81.2 Slow → Fast Rotation,90 degrees back and forth 208-223 81.6-87.5 Slow → Fast Rotation,180 degrees back and forth Slow → Fast Rotation,270 degrees back and forth 87.8-93.7 224-239 240-255 94.1-100 Slow → Fast Rotation,360 degrees back and forth Prism Macro 0-15 0-5.9...
Page 20
Channel table (16CH PLUS) Percentage Channe Function Colour 0-1.56 White 1.96-3.14 White+Red 9-12 3.53-4.71 13-17 5.10-6.67 Red+Orange 18-21 7.06-8.24 Orange 8.63-9.80 22-25 Orange+Aquamarine Aquamarine 26-29 10.2-11.4 Aquamarine+Green 30-34 11.8-13.3 35-38 13.7-14.9 Green 39-42 15.3-16.5 Green+Light Green 43-46 16.9-18.0 Light Green 18.4-20.0 Light Green+Lavender 47-51...
CLEANING AND MAINTENANCES ●In order to ensure the projector could work normally.It should be kept clean always .It is recommended that the fans and ventilation in let should be cleaned every 15 days.The lens and dichroic colour filters should also be reg -ularly cleaned to maintain an optimum light output.Do not use any type of solvent on dichroic colour filters.It will damage the projector.
■The light shadow is fogging: ◎Please check the data on the DMX 512 controller is suitable for the electric focus. ◎Please check the machenical parts is jamging.After cleaning,please add some temperature -durable juice. ■The light works interruptly: ◎Please check if the fan works normally or mote clogging. ◎Please check whether the abstract heat have the mote clogging.