Page 1
Tornado Series S600 SPOT ANUAL Please read these user manual carefully before use www.lightsky.com.cn www.lightsky-china.com FLY DRAGON LIGHTING EQUIPMENT CO., LTD...
◆My company reserves the right to modify the characteristics stated in this user manual at any time and without prior notice. LIGHT SKY PROFESSIONAL SHOW LIGHTING...
The products referred to in this manual conform to the European Community Directives to which they are subject: •Low Voltage 2006/95/CE •Electromagnetic Compatibility 2004/108/CE LIGHT SKY...
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD TECHNICAL INFORMATION ● IP set ● Power supplies available Automatic charging battery,IP could be set AC90-240V/50-60Hz without electricity. ● ● Power Features 600W(220V/50Hz) Remote control lamp’s switch function, display light and lamp’s using time, ● Lamp automaticallay adjust cooling-fan’s speed, SIRIUS HRI 440W 60x1(OEM) 41mm...
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD ATTACHMENT AND BODY SIZE USER MANUAL BRACKET LAMP (fitted into projector) SAFETY CORD WARRANTY CARD DMX CABLE Attachmentcontents- Fig. 1 Body Size---Fig 2 PROFESSIONAL SHOW LIGHTING...
WARNING:with the exception of when the projector is positioned on the floor, the safety cable must be fitted. This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base. Mains Connecting to the mains suppply ---Fig 4 LIGHT SKY...
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD Connecting to the control signal line (DMX) - Fig. 5 ◎ Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first projector's output to the second projector' input and connect the second projector's output to the third projector's input.
Circuit connecting diagram LAMP Electronic ballast Switched power supply Power Fuse 5A input output X Y Drive board 28V GND Power input AC90~240V Power input 50~60Hz output Power input...
◎Please measure if the power supply is enough. ◎Small adjusting is suitable for change height or screw system till get a ideal light beam. ◎TO enter the menu FANCTORY DEFAULT input 2222 enter the COLOR and GOBO regulation, until the optical center. LIGHT SKY...
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD ■The light shadow is fogging: ◎Please check the data on the DMX 512 controller is suitable for the electric focus. ◎Please check the machenical parts is jamging.After cleaning,please add some temperature -durable juice. ■The light works interruptly: ◎Please check if the fan works normally or mote clogging.
Need help?
Do you have a question about the Tornado Series and is the answer not in the manual?
Questions and answers