M2M Control CX320 Technical Manual V1.01
Safety
The Safety section provides an overview about the safety instructions, which must be observed for the
operation of this product.
The product is constructed according to the currently valid state-of-the-art technology and reliable in
operation. It has been checked and left the factory in flawless condition concerning safety. In order to
maintain this condition during the service life, the instructions of the valid publications and
certificates must be observed and followed.
It is necessary to adhere to the general safety instructions must when operating the product. The
descriptions of processes and operation procedures are provided with precise safety instructions in
the respective sections in addition to the general safety instructions. Moreover, the local accident
prevention regulations and general safety regulations for the operating conditions of the device are
effective. An optimum protection of the personnel and the environment from hazards as well as a
safe and fault-free operation of the product is only possible if all safety instructions are observed.
Intended use
This product may only be used for the purposes specified in the function overview. In addition, it
may be used for the following purposes:
Usage and mounting in an industrial cabinet.
•
Switching and data transmission functions in machines according to the
•
machine directive 2006/42/EC.
Usage as PLC, data logger and data transmission device.
•
The product may not be used for the following purposes and used or operated under the
following conditions:
Controlling or switching of machines and systems, which do not comply with the
•
directive 2006/42/EC.
Usage, controlling, switching and data transmission of machines and systems,
•
which are operated in explosive atmospheres.
Controlling, switching and data transmission of machines, which may involve
•
risks to life and limb due to their functions or when a breakdown occurs.
Page 5 of 42
Need help?
Do you have a question about the M2M CONTROL CX320 and is the answer not in the manual?