Download Print this page

Fujitsu PG-1863 Manual page 11

Lan card

Advertisement

2.
The confirmation of the system environment and the update to object distribution
The update procedures of distribution are different by system environment of use.
Please carry out update work while obeying a procedure corresponding to system environment of use from
2.1-2.2.
2.1 Red Hat Enterprise Linux AS/ES (v.3 for x86)
1)
About the confirmation of the system environment
Please carry out confirmation of system environment in the following procedures.
(1) Login
Please log in the system with root.
(2) The confirmation of the system environment
Please execute the following commands, and confirm the output result.
# cat /etc/issue
*Please carry out 2) procedures only if the result is older than the following.
Red Hat Enterprise Linux AS release 3 (Taroon Update 8)
Red Hat Enterprise Linux ES release 3 (Taroon Update 8)
2)
About the update procedure
Please download the very latest update kit from our homepage, and carry out update to the latest
update version according to a procedure bundled with an update kit.
About update, please carry it out from an old version in turn.
-The download search
http://www.fujitsu.com/global/services/computing/server/ia/driver/
- The following table shows the update kit list.
Driver kit name
Update kit (2.4.21-47.EL)
3)
About the reset of network
When you built more LAN cards, there is the case that network interface name of on board LAN change eth1
or eth2, eth3...from eth0.
In this case, please set a network again.
or
11
Update
Update8

Advertisement

loading

This manual is also suitable for:

Pg-1863l