Advertisement
Error Code
Description
The washer does
not work at all
Water does not flow
into the Wash/Spin
E11
Tub or water flow is
slim.
Water does not
drain out.
E12
Door fails to open
H
Failure to spin
U3
Door cannot be
U4
closed
Where to Check
• Check if the Power Cord is securely plugged in.
• Press the POWER ON/OFF button.
• Press the PRESET button
• Check whether power failure occurs.
• Check whether the fuse or circuit breaker has
been activated.
• Whether the faucet be opened.
• Whether the water supply hose or the metal
filter in the water inlet has been blocked.
• Whether the water is out of supply.
• The height of drain hose is more than 100m.
• Whether the Drain Hose is inverted.
• Whether the Drain Hose is blocked by scrap of
lint.
• Whether the Drain Hose is too long.
• Whether the temperature of water exceeded
40°C.
• Whether the temperature of water in washing
.
process exceeded 40°C
• Whether the washing machine is positioned
steadily
• Whether the load is too big or too heavy
• Whether the load for spinning is too few
• Whether the blanket has been rolled into a ball
How to resolve the problem
Check and resolve the problem,
then press START/PAUSE for one
time to restart the washer.
Check and resolve the problem,
then press START/PAUSE for one
time to restart the washer.
The door will open
automatically as soon as the
temperature is below 40°C
When the load is too little, add 2-3
pieces of clothes, then check the
machine, close the door and press
START/PAUSE button once to restart
the machine.
Close the door with the "door lock"
light on, and then press
"START/PAUSE" button, the machine
will run.
.
Advertisement
