Eastwood QST 30 Instructions Manual page 4

ASSEMBLY
• Determine the preferred top or
side frame location and select the
appropriate L-Mounting Bracket or
Z-Mounting Bracket (the Z Mounting
Bracket is intended to be used on early
32200 models).
• Use two M5 Phillips Head screws,
Lock Washer, Washer and Nuts to
secure the Mounting Bracket to the
Lid (FIG. 1).
• Install the third M5 Phillips Head screw
to retain the plastic Lid Seal Insert
(FIG. 2).
• Install the 90° Brass Barbed Fitting by
threading it into the tapped hole of the
Lid (FIG. 3).
• Screw the Lid onto the Bottle.
4
FIG. 1 FIG. 1
FIG. 2 FIG. 2
FIG. 3 FIG. 3
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com