Panasonic WV-CS854 Installing page 4

Panasonic WV-CS854: Camera Termination
The figure on page 2 shows the location of the SW2 switch, which is used to select the termination (switch 1) and duplex
setting (switches 2–4, half duplex). Complete the following instructions:
1. Remove the camera from its mount.
2. Set SW2 as follows if the camera is not the final camera in a chain:
3. Set SW2 as follows if the camera is the final camera in a chain:
See the Panasonic WV-CS854 installation manual for more information.
Panasonic WV-CS854: Connecting Multiple Cameras
Additional cameras are connected to the DVX system in a daisy chain, star, or combination configuration; the final camera in
each chain must be terminated. Each camera must have a unique address that matches the video input number it is connected
to on the DVX system (see the DVX user manual). Sample configurations are shown in the following figure.
D A IS Y C H A IN
S T A R
C O M B IN A T IO N
See the camera manufacturer's installation manual for more information.
1 2 3
OFF ON ON
1 2 3
ON ON ON
D V X
A d dres s : 1
A d dres s : 1
D V X
A d dres s : 2
A d dres s : 3
A d dres s : 1
D V X
A d dres s : 3
A d dres s : 5
Installing PTZ Cameras on a DVX system
June 2002
Page 4
4
ON
4
ON
A d dres s : 2 A d dres s : 3
(te rm in at e)
(te rm in at e)
(te rm in at e)
A d dres s : 2
(te rm in at e)
A d dres s : 4
(te rm in at e)
A d dres s : 6
(te rm in at e)
(te rm in at e)