Starting The Program; Adding Laundry; Program Cancel; Resume Program At Rinse Hold - Bosch WGG04408NL User Manual And Installation Instructiions

†Keep the directions for washing
agent and laundry care agent
→ Page 31 at.
Pull out the detergent drawer.
1.
Fill with detergent.
2.
→
†Detergent drawer", Page 19
If desired, fill with a care product.
3.
Slide the detergent drawer into the
4.
appliance.

13.8 Starting the program

Remark:If you want to change the time
until the program end, first set the
ready in time.
onStart/Reloadto press.
▶
aThe drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
aThe display shows whether the program
maduur or the ready in time
displayed.
aAfter the program end, it shows
display: End.
13.9 Loading laundry
PressStart/Refill. The
1.
device pauses.
Remark:When
it is not possible to add laundry.
When
goes out, then the refill
laundry possible.
Open the appliance door.
2.
Reload or remove the laundry.
3.
Close the appliance door.
4.
PressStart/Refill.
5.

13.10 Program Cancel

1.
2.
3.
13.11 Resume program at
1.
2.
13.12 Take out the laundry
1.
2.
13.13 Switch off device
1.
appears
onStart/Reloadto press.
Open the appliance door.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse.
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→ †Programs", Page 26
Remove the laundry
→ Page 33 †
rinse hold
The programCentrifugeor select a
suitable program for draining.
→ †Programs", Page 26
PressStart/Refill.
Open the appliance door.
Remove the laundry.
Turn the program selector onOutto make.
ServiceNL
33