Table of Contents
Advertisement
Cleaning the drain pump
Required:The drain pump is empty.
→ Page 35
As there may still be residual
1.
water in the pump, carefully
unscrew the lid.
Large impurities can cause the
†
filter element to get stuck in the
pump housing. Loosen impurities
and remove filter element.
Clean the interior, screw thread of
2.
the pump cover and pump
housing.
The pump cover consists of two
components that can be
disassembled for cleaning.
Verify that the impeller of the pump
3.
spins easily.
Cleaning and maintenanceNL
Install the pump cover.
4.
Check that the pump cover
†
components are correctly
assembled.
Tighten the pump cover as far as
5.
it will go.
90°
The pump cover handle must
be vertical.
Install and close the service door.
6.
2
1
37
Advertisement
Table of Contents
