Remove the 4 sleeves.
4.
Install the 4 cover caps.
5.
Push the 4 cover caps down.
6.
Set up and connectNL
4.5 Connecting the device
Connect water supply hose
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
Do not immerse the electric
▶
Aquastop valve in water.
Connect the water inlet hose to the
1.
tap (26.4 mm = 3/4").
Open the tap carefully and check
2.
that the connections are tight.
Connection types for water drainage
The information will help you to connect
this appliance to the water outlet.
PAY ATTENTION!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
Secure the water drain hose against
unintentional disconnection.
Remark:Observe the pumping
heights.
The maximum pumping height is
100 cm.
15