Malfunction
"E:35 / -10"
flashes.
burns.
flashes.
All other error codes.
"E:30/-20"
Cause and Troubleshooting
Close the tap.
▶
Please contact customer service.
▶
→
†Customer Service", page 49
The Voltage Control System detects an impermissible
voltage drop.
No solution possible.
▶
Remark:When the supply voltage has stabilized, the
program continues normally.
Undervoltage can cause a program extension.
No solution possible.
Temperature is too high.
Wait for the temperature to drop.
▶
→ †program cancel", Page 33
▶
Water level is too high.
Select a suitable program for draining.
▶
→ †Programs", Page 26
Door is not closed.
Close the door.
1.
To start the program, pressStart/Refill.
2.
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, pressStart/Refill.
4.
Malfunction
Please contact customer service.
▶
→
†Customer Service", page 49
Solenoid valve defective.
Please contact customer service.
▶
→
†Customer Service", page 49
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with an equal load.
Additional water filled.
▶ Do not fill the device with additional water during
operation.
TroubleshootingNL
41