Table of Contents
Advertisement
de Set up and connect
4.5 Remove the transport
struts
Loosen and remove the screws of
1.
the vertical transport struts with
a T20 screwdriver.
Remove the transport struts.
2.
Loosen and remove the screws of
3.
the horizontal transport strut with a
T20 screwdriver.
16
Remove the transport strut.
4th
4.6 Connect the device
Water inlet hose
connect
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
Do not immerse the electric
▶
Aquastop valve in water.
Notice: Make sure that you connect
the device to a water inlet with a
safety device against drinking water
contamination through backflow
(according to DIN EN 1717). The
connection valves / taps provided for
this purpose are equipped with this
safety device if the building is
properly installed.
Advertisement
Table of Contents
