Specifications - Mitsubishi DIAMOND PRO 900U NFJ9905SKHUW User Manual

6
6

SPECIFICATIONS

Size
Mask type
Gun
Deflection angle
CRT Phosphors
Aperture grille pitch
Face Plate
Focusing method
INPUT SIGNAL Video
Sync
SIGNAL INTERFACE Input Connector
Input Impedance
Function
USB
Interface
SCANNING Horizontal
FREQUENCY Vertical
RESOLUTION (HxV) 1600dots x 1200lines Non-Interlaced maximum addressable resolution format at 75Hz
WARM-UP TIME 30 minutes to reach optimum performance level
BRIGHTNESS 100cd/m
BLANKING TIME Horizontal
Vertical
DISPLAY SIZE 350mm x 262mm(typ.)
COLOR 5000K~9950K
POWER SOURCE AC100-120/220-240V±10% 50/60Hz 135W (typ.)
<150W(max.): with USB operation>
OPERATING Temperature
ENVIRONMENT Humidity
CABINET (W)17.9inch x (H)18.0inch x (D)18.0inch (W)454mm x (H)458mm x (D)456 mm
WEIGHT Approx. 26kg (57.3lbs.)
TILT/SWIVEL Tilt Angle
BASE Swivel Angle
Safety
EMC
REGULATIONS X-Ray
Other
50cm/19"(46cm/18" Diagonal Viewable Image)
Aperture grille
In-line
90°
Red, Green, Blue EBU (medium short persistence)
0.25 - 0.27mm (variable)
Anti-glare, Anti-reflection and Anti-static coating
Dynamic Beam Forming (DBF)
0.7 or 1.0Vp-p analog RGB
Sync. on Green or separated H, V sync. or Composite sync
5BNC, DB9-15P
75Ω (video), 1kΩ(sync.)
Self-powered HUB complying with Universal
Serial Bus Specification Rev.1.0.
USB Monitor Control to adjust the image on
screen by USB commands from the computer.
2 Upstream ports/12Mbps.
3 Downstream ports/12Mbps, 1.5Mbps, possible
to supply 500mA max. per each Downstream port.
30 - 95kHz
50 - 152Hz
2
, standard full white video signal at 9300K (+ 8MPCD)
≧ 2.3 µsec (typ.)
≧ 500 µsec (typ.)
ratio 4:3
5 - 35°C
10 - 90%RH (without condensation)
-5° - +15°
±90°
UL1950 (UL), CSA C22.2 No.950 (C-UL)
EN60950 (TÜV-GS)
FCC Class-B, DOC Class-B
EN55022 Class-B, VCCI Class-B
EN50082-1, EN61000-3-2, EN61000-3-3
DHHS, HWC, Röv vom 8.1, 1987
CE-Marking, MPR-II
ISO9241-3, ISO9241-7, ISO9241-8 (TÜV-ERGO)
TCO '95, ZH1/618 (TÜV-GS)
International E
NUTEK Spec. 803299/94
Guidelines for the Suppression of Harmonics
in Appliances and General-Use Equipment
- 1-35 -
S Program
NERGY TAR