Advertisement
• Once the desired setting or program has been selected, press the knob in to activate it;
the appliance will begin operation.
• Cancelling operation: During the setting process or during the operation process, long-
pressing the knob for 3+ seconds will clear all set programs and return to standby
mode.
• Pausing operation: While the appliance is operating, pressing the control knob will
pause, and the display will show "PAUSE". Then you can open the lid, remove the jug or
add missing ingredients. Once food has been added, place every element back in its
correct position and press the control knob again to resume operation. After 10 minutes
in "PAUSE" status without any operation, the appliance will automatically turn off.
• If no operation on appliance during standby mode for 10 minutes, the appliance will
automatically turn off.
Timer
The display shows
• Press the timer button once and the minute digits will start flashing, indicating users
can adjust the minutes settings. Pressing the timer button again will cause the second
digits to start flashing. Pressing the timer button again will cause the hour digits to start
flashing. In all cases, turn the control knob left or right to adjust the
hour/minute/second settings.
• During operation, you can press the timer button to adjust the cooking time and the
appliance will start counting down automatically.
• If the timer has not been set, the unit will operate with the preset times:
o
Heating (without blending): max. 12 hours
o
Blending (speed 1-4): max. 1 hour
o
Blending (speed 5-10): max. 2 minutes
Speed
• During standby mode or operation, press this button to enter speed-setting mode. The
speed icon will flash on the display.
• Turn the knob left to decrease speed and right to increase it, from level 1 to 10.
• Press the speed button during the blending or heating process to adjust it. Speed
options will vary depending on the cooking temperature.
• If the selected speed is 5-10, the timer will only be set up to 5 minutes. For all other
speed settings, the timer can be set for up to 1 hour.
for hours/minutes/seconds (HH:MM:SS) format.
17
Advertisement
