Advertisement
To uninstall a blade:
1.
Hold the blade gently to ensure it doesn't drop when released.
2.
On the underside of the jug, turn the plastic blade lock counter clockwise.
3.
Remove the blade carefully. Make sure it does not fall suddenly, as it may cause
damage or be damaged itself.
Notes:
• We recommend using a cloth to cover the blades before handling to avoid injury.
• If the blade is not properly attached, food or liquids may splash during cooking.
• Do not use the kneading blade above speed '3' as the jug may vibrate and
present a risk.
• The distance between the kneading blade and the jug wall is 1 cm, which could
cause food to get stuck. If this happens, the unit's engine will stop working and go
into self-protection mode. Use the spatula to mix and remove stuck food so that
the appliance can resume cooking.
Butterfly whisk accessory
This accessory works installed on top of the multifunctional blade,
this way it helps with mixing food and removing lumps. To install
the butterfly whisk accessory, align the hole on the whisk
accessory with the centre of the shaft, then push the whisk
accessory down to secure. To remove, simply pull up from the
multifunctional blade.
Notes:
• The butterfly whisk will not fit on top of the kneading blade, or on its own. It must
be fitted to the multifunctional blade.
• Do not use the butterfly whisk unless the multifunctional blade is fixed securely in
place.
• Do not use the butterfly whisk above speed '4'.
• Do not use the butterfly whisk at the same time with the spatula.
• Do not pour food into the jug while it is operating with this accessory fitted, as this
may cause blockage or damage.
10
Advertisement
