Parkside PBZS 5 A1 Original Instructions Manual page 40

■ Please observe the operating instructions of the
drill when you are using the product .
■ Disconnect the mains plug before assembling or
disassembling parts or when the tool is not in use .
■ Do not leave the product unattended when it is in
operation .
■ Check that the connected hoses are attached tightly .
■ The product cannot be turned by hand .
■
does happen, remove the plug from the mains power
socket immediately .
■ Avoid sucking up coarse dirt as this could damage the
product . If necessary, use a filter on the intake hose .
■
water!
■ Operate the drill only in a clockwise direction .
PBZS 5 A1
Make sure that no liquids can get onto the
drill you are using to power the product . If this
Do not pump any flammable, explosive,
toxic or corrosive liquids or drinking
GB │ MT
│
37 ■