BOON EDAM Tourlock 120/22 Safety And User Instructions

Tourlock 120/22
S e c u r i t y d e v i c e s
1 Contactmat
2 Hangsensor*
3 Weightsensor*
4 Failsecure*
5 Failsecure + emergency unlocking*
Version : 2014/01/31
Issue : TL120/22-INS-UK
M a i n t e n a n c e
Caution! Don't use water near the drive- units and controlboxes.
Warning! Switch OFF the power supply of the Tourlock120/22 during
maintenance or other work.
Weekly: Clean the anodised, stove enamelled and/or stainless steel
surfaces with a wet cloth.
Monthly: Clean the anodised, stove enamelled and/or stainless steel
surfaces with a wet cloth and a non- aggressive soap.
Vacuum clean all the brushes.
Yearly: The Tourlock120/22 needs a major maintenance check
once a year. This has to be done by Boon Edam or an
approved agent. This applies as well for repairs.
Dealer
For further information: consult the operating manual.
Boon Edam B.V. P.O. Box 40, 1135 ZG Edam Holland.
I n s t ru c t i o n c a r d
T o u r l o c k 1 2 0 / 2 2

Safety- and users instructions

Control panel*

Security devices

Maintenance

Explanation of the symbols
Secured side
Non secured side
Max. admissible weight of 110 kg,
Doorset rotates 120°ACW
(Weightsensor)
120
>1 10 kg
Authorization after using card
Doorset rotates 120°CW
reader
120
3x Authorization at most after
Doorset rotates manually
using card reader
max. 3x
Doorset will be blocked in
Passage possible within 9 seconds
the failsecure mode
9 sec.
Doorset completes
No power supply
120°-cycle ACW
Doorset reverses CW Acoustic signal
Doorset is locked Option
?
Check the emergency- and safety devices and the general
function of the Tourlock120/22 daily!