BOON EDAM Turnlock 100 Safety And Operation Instructions

BOON EDAM Turnlock 100 Safety And Operation Instructions

Advertisement

Turnlock 100 / 150 / 200
Maintenance
Caution !
Caution using water near or in the control boxes.
Warning !
Switch the power supply off before carrying out any maintenance and/or
other work on the Turnlock.
Daily :
Check daily the functionality of the Turnlock.
Weekly :
Clean stainless steel, polycarbonate or aluminium surfaces with a damp cloth.
Monthly :
Clean stainless steel, polycarbonate or aluminium surfaces with a damp cloth and soft soap.
Annually :
The Turnlock should be serviced once a year. Always have this carried out by a
Boon Edam approved dealer. The same applies to repairs.
Dealer
For further information: consult the operating manual.
Boon Edam Inc. 420 McKinny Parkway Lillington, NC 27546, USA
I n s t r u c t i o n C a r d
Turnlock 100 / 150 / 200
Turnlock 100 / 150
Turnlock 100 / 150
Safety and op eratio n instruction s
Mainten ance
Explanation of the symbols
Turnlock locked
Turnlock unlocked
Turnlock free to use
Turnlock speedcontrol*
No power supply
Power supply
Test the emergency and safety devices every day and check
that the Turnlock is generally working properly !
Version : 2014/01/22
Issue :
TU/100/150/200-INS-UK
Turnlock 200
Turnlock 200
Turnlock can be used in one or two
directions / free access
Card or ticket reader authorisation
Pushbutton authorisation
No access*
Authorised access*
Action after 4 seconds or
4 s
adjustable (1 to 25 seconds)
*
Option

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Turnlock 100 and is the answer not in the manual?

Questions and answers

Summary of Contents for BOON EDAM Turnlock 100

  • Page 1 Test the emergency and safety devices every day and check For further information: consult the operating manual. that the Turnlock is generally working properly ! Boon Edam Inc. 420 McKinny Parkway Lillington, NC 27546, USA Version : 2014/01/22 Issue :...
  • Page 2 Turnlock 100 / 150 / 200 Safety and operational instructions A Safety devices (electro-mechanical design only) B Authorisation systems (optional) C User feedback D Working principles (electrical) 1 Fail-safe 1 Pushbutton control panel on external console 1 Indicator lights in ceiling* 1 Authorised access or exit, one authorised user may pass (15 passages/min.)

This manual is also suitable for:

Turnlock 150Turnlock 200

Table of Contents