Installing And Starting The Siteprotector Console; Installing The Siteprotector Console - IBM Proventia Management SiteProtector SP1001 Hardware Configuration Manual

What to do next
You have now connected the SiteProtector SP1001 appliance to the network using
the LCD panel, so you are ready to download the SiteProtector Console and point
it to the appliance. From the SiteProtector Console, you can install licenses and
change administrator and database passwords.

Installing and Starting the SiteProtector Console

To connect to SiteProtector for the first time, you must download, install, and start
the SiteProtector Console on your computer.
About this task

Installing the SiteProtector Console

Procedure
1. Click Start on the task bar, and then select Programs → Internet Explorer .
2. Type the following:https://appliance_IP_address:3994.
3. Click Yes to accept the security certificate.
4. Read the IBM ISS License Agreement, and then click Accept.
5. Click the Install SiteProtector Console link.
6. Select Run to download the SiteProtector Console to your computer.
7. Select Run when asked to run this software to your computer.
8. Follow the steps on the SiteProtector Console - InstallShield Wizard to install
Note: The SiteProtector SP1001 appliance restarts automatically if you change
the IP address or the host name of the appliance.
Note: The IBM ISS License Agreement appears only when you access this Web
site for the first time.
the Console on your computer.
Chapter 3. Connecting and Configuring the SiteProtector SP1001 Appliance
17