Table of Contents
Advertisement
: The monitor screen works even if the engine is not started. All it needs is electrical power.
N
OTE
However, if you start the engine, the monitor will reboot to reflect the changes caused by the
starting of the truck.
Main Page
The next page that comes up after the Welcome Screen is the Main Page (see Figure 3-3). Here you
will find a link that will give you access to the Main Menu (see Main Menu on page 47). Any warning
or error messages that may occur while the truck is being operated are also displayed on this page.
The following optional indicators, when provided, are also found on the Main Page : Cart Counter,
Time and Date Indicator and Hydraulic Oil Temperature Indicator.
Cart Counter (optional)
This indicator tells you how many carts have been emptied so far.
Figure 3-3
Main Page
Press the far right button to reset the counter display to zero.
Time and Date Indicator (optional)
A time and date indicator may be found on the upper left-hand side corner of the screen. The
availability of this indicator is based on the chassis on which the body is mounted. If the chassis
provides real-time clock information through J1939 bus, time and date will appear on the screen. To
set the Time and Date indicator, go to the Main Menu and choose Time Adjust.
Hydraulic Oil Temperature Indicator (optional)
This optional indicator, when provided, shows you the current hydraulic oil temperature. This
indicator is found on the upper right-hand side corner of the screen.
Warning and Caution Messages
On the monitor screen, yellow-highlighted messages indicate that caution should be used and red-
highlighted messages indicate a warning situation that must be dealt with quickly.
Controls and Indicators 41
Advertisement
Table of Contents
