Silvercrest SPBH 3000 B2 Operating Instructions Manual page 17

♦ If charging does not start automatically, press
the ON button
process .
NOTE
► Alternatively, you can also use the original
charger cable (USB cable) provided by the
respective device manufacturer .
♦ During the charging process, the current charge
level of the Power Bank is shown via the charge
level LEDs
Charging the Power Bank) .
♦ To end the charging procedure, disconnect the
charging cable
the Power Bank . The charging status LEDs
off after about 20 seconds .
■ 14 │
briefly to start the charging
(see table in chapter entitled
from the mobile device and
GB │ IE │ NI
SPBH 3000 B2
go