Sub Menu; Password Change - Maxtor 4-Channel DVR (Digital Video Recorder) User Manual

Press the up
desired time selection.
Then press the select
and no recording (--) for the selected time slot.
(T) System will record continuously during this period.
(S) System will record when sensor or motion is triggered.
Refer to SENSOR/ MOTION SETUP on page 25 to setup a sensor/ motion detector.
(--) System will not record during this period.
* You can see indication of (T), (S), (--) on viewing screen.
Once you have finished, press the menu
Note: You must press the record

SUB MENU

To change a password, set the time for your DVR, or to turn audio recording on or off, navigate to SUB
MENU.
MAIN MENU
CAMERA SELECT
RECORD SELECT
RECORD MODE
RECORD FRAMERATE
VIDEO QUALITY
RECORD SCHEDULE
> SUB MENU
Then, press the select
SUB MENU
> PASSWORD CHANGE
TIME SET
AUDIO RECORD
AUDIO MUTE
VIDEO SYSTEM
LANGUAGE SETUP
PRESS (UP, DOWN) , THEN (SELECT)
PRESS (MENU) TO EXIT
(1)SUB MENU - PASSWORD CHANGE
To change a password, navigate to PASSWORD CHANGE in the SUB MENU and press the select
button
The following screen will appear:
or down button on the DVR's front panel to move the arrow
button to change between continuous recording (T), sensor recording (S)
button to start a recording session.
1234
1234
EACH
30
NORMAL
button to display the following menu:
ON
OFF
NTSC
ENGLISH
button to exit.
21
to the
V