Chapter 6: Dvr Menu; Main Menu; Camera Select - Maxtor 4-Channel DVR (Digital Video Recorder) User Manual

Chapter 6: DVR Menu

MAIN MENU

In order to select cameras for recording, set recoding quality, schedule recording times and to set other
operation parameters, you will need to access the DVR's menu.
To access the DVR's main menu, press the menu button
see the following screen on the monitor connected to the DVR.
> CAMERA SELECT
RECORD SELECT
RECORD MODE EACH
RECORD FRAMERATE
VIDEO QUALITY
RECORD SCHEDULE
SUB MENU
HARD DRIVE SETUP
SENSOR / MOTION SETUP
NETWORK SETUP
PRESS (UP, DOWN) , THEN (SELECT)
PRESS (MENU) TO EXIT
In the main menu, the arrow indicator
selections. Press the UP
sign up or down in order to navigate to the menu selection desired.
>
You can also use this function via network.

CAMERA SELECT

To select cameras for viewing on your monitor, navigate to CAMERA SELECT.
Then, use the buttons
monitor screen.
MAIN MENU
> CAMERA SELECT
You can also press the select button
• When you choose ( - - - - ), all cameras will be disabled.
• When you choose (1 2 3 4), all cameras will be operational.
• When you choose ( - - - 4 ), only camera 4 will be operational.
• When you choose (1 2 - 4), cameras 1, 2, and 4 will be operational.
There are 16 different combinations of camera viewing settings.
Note: When viewing in quad screen mode, the following diagram shows where each camera is displayed
on the monitor connected to the DVR.
MAIN MENU
1 2 3 4
1 2 3 4
30
NORMAL
will be shown on the screen to the left of the menu listings menu
>
or DOWN
on the DVR's front panel to select a camera for real-time viewing on the
1 2 3 4
for different combinations of camera viewing. For example,
on the DVR's front panel. You will
key on the DVR front panel to move the arrow
18