Video Quality; Record Schedule - Maxtor 4-Channel DVR (Digital Video Recorder) User Manual

MAIN MENU
CAMERA SELECT
RECORD SELECT
RECORD MODE
> RECORD FRAMERATE
The factory default setting is 30, which means the DVR records at the speed of 30 frames per second.
The higher the record frame rate, the more natural motion will be displayed on the screen for playback.
The lower the record frame rate, the more space you will save on the hard disk drive. There are different
record frame rate settings to choose from (between 30 frames and 1 frame per second).

VIDEO QUALITY

To choose the video quality for recording, navigate to VIDEO QUALITY.
Then, use the select button
MAIN MENU
CAMERA SELECT
RECORD SELECT
RECORD MODE
RECORD FRAMERATE
> VIDEO QUALITY
The higher the video quality, the clearer the image will be during playback. The lower the video quality,
the more space you will save on the hard disk drive.
Note: The video quality in View Mode is not affected by the video quality setting.
These settings only affect the video quality during playback of recorded video.

RECORD SCHEDULE

To schedule recording a specified times throughout the day, navigate to RECORD SCHEDULE.
MAIN MENU
CAMERA SELECT
RECORD SELECT
RECORD MODE
RECORD FRAMERATE
VIDEO QUALITY
> RECORD SCHEDULE
Then, press the select button
The numbers below indicate the hours of the day based on a 24-hour clock. The first "T" on the left is
equal to the first hour of the day (12 midnight through 1:00 am). The next "T" equals the second hour of
the day (1:00 am – 2:00 am), and so on.
1 2 3 4
1 2 3 4
EACH
30
to choose either LOW, NORMAL or HIGH.
1 2 3 4
1 2 3 4
EACH
30
NORMAL
1 2 3 4
1 2 3 4
EACH
30
NORMAL
to display the following menu:
PROGRAMMED RECORD
PRESS (UP, DOWN) , THEN (SELECT)
PRESS (MENU) TO EXIT
20
SELECT