Maxtor digital video recorder ave mvdr-5000 installation & operation manual (71 pages)
Summary of Contents for Maxtor 16Channel Stand Alone DVR
Page 1
16Channel Stand Alone DVR Audio, USB Backup available...
Page 2
Notice Notice Notice Notice Be aware thoroughly about the power connection before installation of the unit. Before initial configuration or operation you must first set the TIME/DATE, followed by setting the unit to the FACTORY DEFAULT settings, lastly clearing the HDD. Please follow these steps in order.
CHAP. 5 Set Up ▲▼◀▶ ▲▼ ※If more than 2 channels pop up at the same time, ▲▼ the first channel out of them will be shown. (For e.g. Ch1 and CH3 pop up at the same time, CH1 will be shown)
Page 30
LEFT , RIGHT : Change per 100MB unit User can back up the recorded data to USB Media using USB (HOST) port on front panel of DVR. Refer to [START] and [END] of data on HDD and set start and end time of data to USB Media ( USB Memory Stick ).
Page 37
Internet Internet (Static IP) Internet Internet Remote Viewer (Client) CHAP. 6 Network Setup DVMR (Server)
Page 38
Internet Internet Internet Internet Remote Viewer (Client) CHAP. 6 Network Setup Cable Modem (Dynamic IP) DVMR (Server)
Page 39
Internet Internet Internet Internet Remote Viewer DSL Modem (Client) (Dynamic IP) CHAP. 6 Network Setup Router or Gateway (IP Share) DVMR (Server)
Page 47
CHAP. 7 DDNS Web Server * Register DVR for DDNS Web-server and set DVR as shown below, 7 7 7 7 - - - - 1. Registering DVR for DDNS (DDNS Web 1. Registering DVR for DDNS (DDNS Web- - - - server) 1.
Page 48
3) Please click confirm after inputting DVR Name & Mac Address. 4) Now, DVR is listed on DDNS Web Server without IP and Port number.
Page 49
7 7 7 7 - - - - 2. 2. 2. 2. D D D D DNS Set Up in DVR DNS Set Up in DVR DNS Set Up in DVR DNS Set Up in DVR * The following setting is a sample for a cable modem connected to DVR directly.
Page 50
IP address which is assigned from DHCP Server is automatically input on DNS Server. 5) Go down to REGISTER and push ENTER button to renew IP and Port resistered on DDNS Sever( ( Interval : connection interval time between DVR and DDNS Server) D = Day, H = Hour, M = Minute ---.---.---.--- ▲▼...
Page 51
6) Go to your PC again after you see “SUCCESS TO REGISTER DVR INFO.” and then Click ‘refresh’ button. Then, DDNS Server automatically catches your DVR’s IP address and Port number. Note. Note. Note. Note. Before using Web-Viewer, please add follows.
Page 52
③ ③ ③ ③ ④ ④ ④ ④ ⑥ ⑥ ⑥ ⑥ ⑦ ⑦ ⑦ ⑦ ⑤ ⑤ ⑤ ⑤ Click Click Click Click Leave this check box empty...
Page 53
3. Web Program 3. Web Program *If ActiveX control installation is required for the first time access,please click ‘Yes’. Input information needed for network connection to DVR manually. Click these icons, then it connects to DVR automatically via DDNS Server.