4CH STANDALONE DVR 3、INSTALLATION REAR PANEL AUDIO VIDEO IN VIDEO OUT DC12V (2) (3) 1 Audio Input. (2) Audio Output. (3) Video Output : Corresponding to Video Input. (4) Video IN : Cameras to Video Input. Power Input : Please use the power supply attached...
(8) Menu / Show Percentage of the hard Drive recorded (9) Play / Pause (10) Record / Stop (11) Fast Reverse / Mute (12) Fast Forward / Sequence Switch 4CH STANDALONE DVR ( 2 ) ( 4 ) ( 5 ) ( 8 )
(2) If the password was not accepted, you will receive a message that inform you. NO PASSWORD CHANGED *Use the view control button on the front panel to input the number. 4CH STANDALONE DVR MAIN MENU ) : SET ) : EXIT...
Page 9
4CH STANDALONE DVR is:"1" is:"2" TIME SETUP Select this item to set up current time. TIME SET 2004/12/17 18:00:30 ) : SELECT ): SET Press to select items, use Press to exit CAMERA SETUP CAMERA SETUP CAMERA : CH1 LIVE ON/OFF...
P ss ID UELE D S UD U D U N S 4 EN R e SSteSe eSHS Ste ee StSe UU P o e rst Etst 4CH STANDALONE DVR RECORD SCHEDULE RECORD SCHEDULE Press to select items, use Press to exit (1)Range: 0-24 hrs.
*Press to stop. 8、RECORD CONTROL (1)Press to start recording. (2) During recording, the mark * appears in status of overwriting 4CH STANDALONE DVR SEARCH TIME HARD DRIVE : MASTER 01 TIME 2004/12/10 02:47:50 02 TIME 2004/12/10 02:47:50 03 TIME...
Re cording Re sults in NT SC Forma t Video Display Signal Format QU AD MOD E EA CH MOD E (Full Sc reen) 4CH STANDALONE DVR 30 fps 15 fps Video Quality Hi gh 36Hours 72 Hours Nor mal...
Operating System (OS) Installation A. Hardware Installation Before executing the application, connect the DVR Storage Device to the IDE cable of your PC directly, or via USB adaptor B. Software Installation Run Setup.exe in the CD-ROM and follow the instruction to finish the installation.
Page 14
Shortcut to play the video files on your PC via the attached USB cable: a. Connect USB cable both ends to the USB port of the DVR and your PC. b. Supply 12VDC power to the DVR. c. Wait until the message of USB detected pops up on the VGA monitor.
Page 15
If you want to see MYS file which was stored in your PC, press this button or press [F2] key. ii. DVR Storage Device Change Button When there are more than one DVR storage devices, this button will be activated. Press this button when you want to see video/audio stream stored in other DVR storage device. Fig.3 shows DVR storage device selection window.
Page 16
DVR Storage Device Information Button If you want to know how big is the DVR storage device is, or how much stream data is stored in the device, press this button. Fig.4 shows the DVR storage device information window.
Page 17
4CH STANDALONE DVR vi. Capture Stream Button If you want to capture stream, follow the stream capture procedure listed below: * Using Positioning Slider Bar find the stream position you want. * Make sure that the playback is in PAUSE mode, and the Capture Stream Button is enabled.
Page 18
4CH STANDALONE DVR Screen MYS File Select Dialog Positioning Slider Bar PC Viewer Button File Open Button Fig.9. MYS File Player User Interface B. Functions i. PC Viewer Button When you want to back to PC Viewer function, press this button.
Page 19
4CH STANDALONE DVR vi. Audio Control Fig.11. Audio Control Buttons Press button to enable sound. Once sound is enabled, the button icon will be changed to . Press Ttond, th rese soH S ton ntons tons...
Need help?
Do you have a question about the Standalone DVR 2007 and is the answer not in the manual?
Questions and answers