Attaching And Removing A Lens - Mamiya 645 AFD III Instructions Manual

Attaching and Removing a Lens

Attaching
A
f t
2 2
m
11
4
4
11
22
M
F
A
2 2 11 F
m
4
f t 4
11 22
15
1. Remove the front body cap, just like
you would remove a lens, by pushing the
lens release button backward and then
turn the front body cap or the lens itself
counter clockwise and lift out.
To remove the front lens cap, squeeze the shiny
sections together and lift out.
T o remove rear lens cap turn it counter clockwise.
C B
★ Do not touch the distance ring or other rotating parts when attaching the lens.
When installing a lens, do not press the lens release button
★
Removing
A
★ After removing the lens from the camera body, protect both ends by attaching the
caps.
Oil, dust, fingerprints or water on the electronic contacts could result in malfunction
★
or corrosion. Wipe such impurities off with a clean piece of cloth.
2. Attaching the lens
Line up the lens mount alignment mark B with
mark C on the camera to fit the lens in place,
then rotate it in the direction of the arrow until it
clicks into place.
.
While sliding the lens release button back
tate the lens counter clockwise until it stops and
lift it off.
, ro-
16