B&O Play BEOPLAY V1 Manual page 7

>> Connections
Connect a computer
Disconnect the television, the computer
and all equipment connected to the
television and computer from the mains
before you connect additional
equipment.
Connect an analogue source
You can connect one analogue source,
such as a video tape recorder or game
console. To configure connected
equipment to the television,
Disconnect all relevant systems from the
mains before you connect additional
equipment.
Connect a computer
> Using the appropriate type of cable,
connect one end to the DVI or HDMI
output socket on your computer, and the
other end to an HDMI IN socket on the
television.
> If you use the DVI output socket on the
computer, use the appropriate cable and
connect the digital sound output on the
computer to the S/P-DIF IN socket on the
television to hear sound from the
computer in the speakers connected to
the television.
> Reconnect the television, the computer,
and all connected equipment to the mains.
Remember, the computer must be
connected to a grounded wall outlet as
specified in its setting-up instructions.
Connect an analogue source
> Connect the cable to the appropriate
socket on the equipment you wish to
see page 11. connect.
> Run the cable to the AV IN socket on the
television.
> Reconnect the television and the
connected equipment to the mains.
Different adaptors and maybe also cables
are needed. Cables and adaptors are
available from your Bang & Olufsen retailer.
7