Connections - B&O Play BEOPLAY V1 Manual

Connections

The connection panel on your
television allows you to connect
signal input cables as well as a
variety of extra equipment, such
as a Blu-ray player.
Any equipment you connect to
these sockets can be registered
in the SOURCE LIST SETUP menu.
For more information, see page
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains. Except when connecting a
source to the HDMI IN socket.
Depending on the type of equipment
you connect to the television,
different cables and maybe also
adaptors are needed. Cables and
adaptors are available from your
Bang & Olufsen retailer.
DVB S2
DVB T2/C
ANALOGUE
11.
Depending on your tuner options, you may
have either one or no satellite input.
If you receive signals from more than one
satellite, you must also use a multi DISEqC
switch. For more information, contact your
retailer.
Loudspeakers
Use Bang & Olufsen BeoLab speakers.
Cables are available from your Bang &
Olufsen retailer. See page 8.
Equipment with HDMI™ output
Equipment with HDMI output such as a
set-top box can be connected to any
available HDMI IN socket in the television.
For more information on how to set up
connected equipment,
A configured source can be selected with
the configured source button or in the
SOURCE LIST. If the television detects an
unconfigured source, you are asked to
choose between doing nothing, showing
the source or configuring it.
Connected equipment can be operated with
its own remote control or you may
download a PUC table to use a Beo4/Beo6
remote control,
see page 11.
5
PL 1–3
PL 1–3
see page 11.