Set Up Additional Equipment - B&O Play BEOPLAY V1 Manual

Set up additional equipment

If you connect additional video
equipment to your television,
you can register the equipment
in the SOURCE LIST SETUP menu.
When the television is switched
on and you connect additional
equipment to the HDMI IN
socket, the television will detect
an unconfigured source. A
message appears on the screen
and you can follow on-screen
instructions to configure the
source.
From the main menu, you can also
bring up the SOURCE LIST SETUP
menu for a specific source, select
SOURCE LIST, highlight the source
and press the red button. Then you
will be asked to name the source and
dedicate a button to the source. You
can now operate the source.
Sources have default settings, for
example sound and picture, that suit
most situations but you can change
these settings if you wish. Select the
source and select the ADVANCED
SETTINGS menu.
If your Beo6 remote control has been
configured to the sources set up in
the television and you change the
source button in the television, the
source button for the specific source
in the Beo6 display will no longer
work. Contact your Bang & Olufsen
retailer to have your Beo6 remote
control reconfigured.
What is connected?
Registering the equipment connected to
the television enables you to operate it
with your Beo4/Beo6 remote control.
MENU
SETUP
SOURCE LIST
SOURCE LIST SETUP
...
When new equipment is detected, a menu is
displayed with the following options: DO
NOTHING, SHOW SOURCE and CONFIGURE
THE SOURCE CONNECTED TO THIS INPUT. If
you want to set up the equipment, use the
navigation button up or down to highlight
the last option and press the centre button
to bring up a setup menu.
11
Download a PUC table
During the configuration procedure, you are
asked if you want to be able to control the
connected equipment with your remote
control. Follow on-screen instructions to
download a Peripheral Unit Controller (PUC)
table.* The television must be connected to
1
the Internet.
If your connected equipment is not on the
download list, there is currently no control
solution for it and you must select
UNSUPPORTED SOURCE. You will not be
able to operate your equipment with your
Beo4/Beo6 remote control. Contact a
Bang & Olufsen retailer for more
information.
You can search with latin characters and
numbers. For equipment names with non-
latin characters you can search for a part of
the name that includes latin characters. You
can also use the browse functions to locate
the correct PUC table.
1 *Some IR-controlled PUC equip ment have
to be switched on using SHIFT + 9 on your
Beo4 remote control. SHIFT can be found in
the Beo4 LIST.
Continues ...