B&O Play BEOPLAY V1 Manual page 37

>> Software and service update
Download or remove PUC tables
If you have connected, for example,
a set-top box to your television and a
Peripheral Unit Controller (PUC) table is
available for this set-top box from the
Internet, you can download the PUC
table and use your Beo4/Beo6 remote
control to operate your set-top box.
Normally you configure the source
when connected as explained
page 11 but you can also download a
PUC table later on.
Your television must be connected to
the Internet to download a PUC table.
For more information about PUC tables,
contact your retailer.
MENU
SETUP
SERVICE
PUC MANAGEMENT
PUC DOWNLOAD
PUC CLEAN-UP
You can also delete PUC tables, however,
on make sure not to delete tables currently
used by connected products.
Depending on your IR-controlled PUC equip-
ment, you may have to press SHIFT + 9 on
your Beo4, to switch on the equipment.
SHIFT can be found in the Beo4 LIST.
37