B&O Play BEOPLAY V1 Manual page 6

>> Connections
Connect digital sources
Connect up to five external HDMI
sources, such as a set-top box, computer
or game console. All connected
equipment to the television must be
configured, see page 11.
Depending on the type of equipment you
connect to the television, different cables
and maybe also adaptors are needed. If you
have more than two types of equipment that
need a PUC socket, you must buy an extra
PUC cable. Cables and adaptors are available
from your Bang & Olufsen retailer.
Computer
1
S/P-DIF AV
IN IN
DVD/Blu-ray player
Example of connected digital sources.
Connect a set-top box
> Connect the cable to the appropriate
socket on the set-top box.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
set-top box, connect an IR-transmitter to
one of the PUC sockets and attach it to
the IR-receiver on the set-top box.
See page 9 for more information on IR-
transmitters.
> Follow on-screen instructions to configure
the source.
Connect a DVD/Blu-ray player
> Connect the cable to the appropriate
socket on the DVD/Blu-ray player.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
DVD/Blu-ray player, connect an IR-
transmitter to one of the PUC sockets and
attach it to the IR-receiver on the DVD/
Blu-ray player. See page 9 for more
information on IR-transmitters.
> Follow on-screen instructions to configure
the source.
6
Camera/
Game console
Camcorder
2 3 4 5
CTRL 1
HDMI IN
Set-top box
Connect a game console
> Connect the cable to the appropriate
socket on the game console.
> Run the cable to an HDMI IN socket on the
television.
> To enable remote control operation of the
game console, connect an IR-transmitter
to one of the PUC sockets and attach it to
the IR-receiver on the game console.
See page 9 for more information on IR-
transmitters.
> Follow on-screen instructions to configure
the source.*
1
Connect a camera/Camcorder
> Connect the cable to the appropriate
socket on the camera/Camcorder.
> Run the cable to an HDMI IN socket on the
television.
> Follow on-screen instructions to configure
the source.
*When selecting GAME CONSOLE as source,
1
the picture mode GAME is activated as default
setting. You can change this setting temporarily
in the PICTURE menu,
PUC 1 A+B PUC 2 A+B
CTRL 2 CTRL 3
see page 22.