Table of Contents
Advertisement
Understanding the guide
Menu operation
MENU
SETUP
SOURCE LIST
SOURCE LIST SETUP
...
Example of menu operation.
Remote control operation
To activate picture modes with Beo4
directly ...
Press to bring up PICTURE in
the Beo4 display
Press to select a picture mode
Press and hold to remove
PICTURE from the display
Example of Beo4 remote control operation.
Beo4 with navigation button
Centre and
naviga tion
button
Beo6
This menu hierarchy illustrates the path
into a menu where you can make
different settings. Press MENU on your
remote control and use the navigation
button down and the centre button to
select and open the menus.
Where relevant, the remote control
operation will be shown.
LIST
– A dark grey button indicates a hard
button you must press.
– The navigation/centre button is
PIC TURE
symbolised by
used to indicate in which direction
1 – 3
you must move the navigation button.
is used when you must press the
BACK
centre button.
On a Beo4 remote control with
navigation button, you use the centre
button with up, down, left and right
( , ,
and ) movement to navigate in
menus. Press in the middle of the centre
button to confirm selections and
settings in menus.
If you operate your television with the
Beo6 remote control, you use the centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the centre button to
confirm selections and settings in menus.
When available, you can also press the
blue button on your remote control to
bring up help texts.
– A light grey button indicates a Beo4/
Beo6 soft button. The button appears
in the Beo4/Beo6 display.
Your television is operated with a Beo4
and .
is
remote control as described in this guide
and Getting Started. However, you can
also operate your television with a Beo6.
Note that your Beo4 remote control
must be set to MODE 1, see 'How do I...'
in Getting Started. You cannot use a
Beo4 remote control without navigation
button.
Bring up the menu overlay by pressing
Menu while the television is on.
Note that a Beo6 should be reconfigured
when you add new products to your setup.
Contact your retailer.
4
Advertisement
Table of Contents
