Software And Service Update - B&O Play BEOPLAY V1 Manual

Software and service update

Your television offers you the
opportunity to look up software
information, update the software
and, if available, download a
Peripheral Unit Controller (PUC)
table to control, for example, a
set-top box with your Beo4/Beo6
remote control.
See software information
You can look up information about the
current software version, its release
date, and any release notes available.
Update software
To download available software updates,
your television must be connected to
the Internet. You can also download
available software updates from
www.beoplay.com/v1/support
USB device. Connect the USB device to
the USB port on the connection panel. It
is recommended that you set the
television to update software
automatically. This requires that your
television is connected to the Internet.
Contact your retailer for more
information about software updates.
36
MENU
SETUP
SERVICE
LATEST RELEASE
MENU
SETUP
SERVICE
SOFTWARE UPDATE
onto a
CHECK FOR UPDATE
AUTOMATIC DOWNLOAD
While the television is updating with new
software, the standby indicator flashes red
and the television should not be
disconnected from the mains.