Panasonic inverter NR-BW530X Operating Instructions Manual page 30

How to clean the refrigerator
Prime Freeze case
„ Remove case
1 Pull the Prime Freeze case all the way out.
2 Lift the case, tilt it, and lift it out of the compartment diagonally.
„ Install case
1 Raise the Prime Freeze case, lift the back of the case and hook along the inner grooves
until it matches and touches the end point.
Notices
● The aluminum heat transfer plate can be removed; however, remember not to grab it with
wet hands when the aluminum plate is cold, as there may be a risk of frostbite.
● When removing or installing the case, be sure to grasp the tray handle with your
outstretched hand. Otherwise, the compartment door may accidentally hit your finger.
Please refer to the illustration above.
● If washing with water, wipe the aluminum plate or allow it to dry before reinstalling into the
refrigerator.
● Do not wipe the lubricant off the contact surface of the guide rail.
If you have wiped out the lubricant, please consult the Service Center.
Icebox
„ Remove case
Lift and pull the icebox forward
until it is completely removed.
„ Install case
Push the icebox until it reachers
the end of ice box holder.
30
Once every 3 months
Aluminum heat transfer
plate (Note that the
aluminum plate is easy
to be scratched and
deformed)
Once every 3 months
Remark
● Choose to stop the automatic ice
making function before cleaning
the icebox
(Page 21).