Panasonic inverter NR-BW530X Operating Instructions Manual page 10

LED lamps and ground connection
● The refrigerator LED lamps are specially designed for this refrigerator, do not replace
them by yourself. If you need replacement, please contact Panasonic Service Center.
● If there is no grounding wiring plug in refrigerator, it should be connected with grounding
connection to prevent electrical hazard from electric leakage.
Moving or shifting
1 Remove ice trays, water and ice in the tank.
2 Unplug the appliance.
3 Adjust the adjustable legs (left and right) so that the legs do not
touch the floor.
4 Empty the water tray at the back of the refrigerator. Place
a container behind the tray at the back of the refrigerator, then
tilt the refrigerator backward to drain water from the tray.
This action requires 4 or more people, of which 2 people lift the
front of the refrigerator to prevent the refrigerator from sliding
and avoid the risk of accidents.
※ How to move and transport
● At least 4 people are required to transport the refrigerator.
● Each person lifts a corner of the refrigerator.
● Do not transport by grabbing the refrigerator door.
Caution
● When transporting, use straps to secure the refrigerator door
and avoid letting the door open by itself.
● Do not place the refrigerator on its side when transporting,
as this may cause damage to the refrigerator.
● After installation, wait at least 4 hours before plugging in the power to ensure that the
gas and oil in the compressor are in a stable state.
10
Drainage hole