Panasonic inverter NR-BW530X Operating Instructions Manual page 25

Hide thumbs Also See for inverter NR-BW530X:
Table of Contents

Advertisement

Caution
● Do not pour water directly into the icebox to make ice.
(Otherwise, the icebox may break).
● Do not pour food or other things into the icebox.
(Otherwise, it is impossible the detect the correct amount of ice, and the automatic ice
maker may stop working, or the icebox may not be removed).
The ice making time will be longer in the following cases.
● The first time using the refrigerator.
(It will take at least 24 hours since the
automatic ice making function only starts
after the inside of the refrigerator is cool
enough).
● When the refrigerator door is frequently
opened.
●When the refrigerator door is slightly open.
1 Take the water supply tank
out.
Pull out the water supply
tank until it is blocked.
Fill in water when the
water level is under "Min"
(Minimum) line.
* Ice could be made for about 2 hours, provided that the temperature in the fridge room is 4 °C,
that in the Prime Fresh room is -3 °C, and that in the freezer room is -20 °C.
„ In the "Quick Ice Making" mode, the ice making speed will increase.
Ice cubes can be made in at least 90 minutes*.
Caution
● After about 6 hours, the refrigerator will automatically return to normal automatic ice making
mode.
● When the refrigerator is in defrost mode, the LED light of [Quick Ice Making] will flash.
Quick Ice Making will restart automatically after the defrosting operation is finished.
● In Quick Ice Making, the consumed energy will increase higher than normal.
● ECONAVI operation does not work during the setting of "Quick Ice Making".
* The room temperature is 20 °C, the temperature of the fridge room, the Prime Fresh room,
and the freezer room are 4 °C, -3 °C, and -20 °C, respectively.
How to use water tank of automatic ice maker*
2 Fill with water.
Do not fill more
water than the "Max"
(Maximum) line.
Open the lid and fill the
water supply tank with water,
then put the lid back in
place.
How to make ice quickly
●When the refrigerator is too full.
● When the room temperature is low during
winter or high during summer.
●When an electrical fault occurs.
Lid
3 Install the water supply
tank.
Push the entire
water supply
tank in.
Confirm the direction of the water
supply tank and install until the tank
touch the end of ice box holder.
(If the water tank does not touch
the end of ice box holder, the
ice maker could not operate)
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents